Complete Heat Transfer Solutions Designs and manufactures a comprehensive range of Cooling Towers.  The Modular Square type (MST) have been developed for Industrial and Commercial use.
The general specification is as follows:

• The MST Cooling Towers are a counter flow design which provides optimum performance and
  efficiency in a minimum plan area.
• All panels are manufactured using Isophalic polyester resin. This formula has been proven in the
  Australian Cooling Tower Industry for 25 years without a problem. The panels have a smooth gel
  coat on the inside and UV protective flow coat on the outside.
• All metal components including fasteners in the wetted area are 304 Stainless Steel.
• The motors are IP56 high efficiency MAX E3 and the standard direct drive is TEAO.
• Various fill media is available from standard film fill to specialised, non-clogging splash fill for
  industrial and dirty water applications.
• The inlet louvres are sinusoidal in profile to prohibit sunlight penetration and splash.
• Site assembly is easy as the MST was designed with this in mind, from the smallest tower to the
  large field erected units. Most of the MST Cooling Towers will fit inside a reasonable goods lift in
  CKD form, if required.